The short answer: An MCS certified installer is one certified by the Microgeneration Certification Scheme for a specific technology, such as air source heat pumps or solar panels. You need one for the £7,500 Boiler Upgrade Scheme grant (£9,000 for oil or LPG homes off mains gas, until 31 March 2027): Ofgem says installers “must be MCS certified to install the heating system they are applying for”. Check any installer free on the MCS register in about two minutes.
Last verified: 20 November 2026 against Ofgem’s installer guidance (V5.2), MCS and GOV.UK.
Why an MCS installer is worth £7,500 to you
| What you want | Do you need MCS? |
|---|---|
| Boiler Upgrade Scheme grant (£7,500 / £9,000 / £5,000 biomass / £2,500 air-to-air) | Yes, certified for that technology, plus an approved consumer code |
| Smart Export Guarantee payments for solar | Yes, an MCS certificate or equivalent |
| Warm Homes Loan for a heat pump or solar | Yes, see heat pump loans |
| 0% VAT on a heat pump or solar | HMRC’s guidance doesn’t require MCS; zero rate until 31 March 2027 |
How to check an MCS installer in 2 minutes
- Go to the MCS Find an Installer search. It’s free.
- Pick the technology you’re buying, for example air source heat pump.
- Search near your address, or by nation and region.
- Filter for Boiler Upgrade Scheme registration if you want the grant.
- Already have a quote? Search the installer’s name or MCS certification number and check the technology matches.
- 1Open Find an InstallerIt's free
- 2Pick the technologyFor example air source heat pump
- 3Search near your addressOr by nation and region
- 4Filter for Boiler Upgrade SchemeIf you want the grant
- 5Already have a quote?Search the name or MCS number; check the technology matches
Certified for YOUR technology, not just “MCS”
MCS certification is per technology. Ofgem says installers must be “certified to install the low-carbon technology type they are applying for”. An installer certified for solar panels isn’t automatically certified for heat pumps, and one certified for air source (air-to-water) isn’t automatically certified for air-to-air. That matters for the £2,500 air-to-air heat pump grant: check the installer is MCS certified for air-to-air before you sign.
The MCS check matters most where the money is biggest. For a gas home that is the flat £7,500 under the Boiler Upgrade Scheme; for an oil or LPG home with no mains gas it is £9,000 until 31 March 2027 (our off-gas heat pump grant guide has the detail). Not sure your home qualifies before you ring anyone? Run through the five eligibility questions first. Ground source and water source jobs need an installer certified for those systems specifically, and a biomass boiler needs MCS biomass certification, not heat pump.
Consumer codes: RECC, HIES and MCS
For the Boiler Upgrade Scheme an installer must also belong to an approved consumer code. Ofgem lists three:
1. MCS certification
- Certified to install the low-carbon technology type they are applying for
2. An approved consumer code
- RECC, the Renewable Energy Consumer Code
- HIES, the Home Insulation and Energy Systems Contractors Scheme
- MCS itself (MCS:2025)
- RECC, the Renewable Energy Consumer Code
- HIES, the Home Insulation and Energy Systems Contractors Scheme
- MCS itself (MCS:2025), for installers on MCS’s redeveloped installer scheme
MCS is rolling the redeveloped scheme out through 2026 and into early 2027. Installers already on it don’t need a separate code. Those still on the old MCS scheme must belong to RECC or HIES. Ask which applies, and note the membership: it’s your route to a dispute service if things go wrong.
Red flags: 7 ways people lose the grant
- “Apply for the grant yourself.” The Boiler Upgrade Scheme is installer-led: the installer applies, then Ofgem asks you to confirm consent.
- A fee to “unlock” or “reserve” a grant. No genuine scheme charges one.
- Deposits against grants that aren’t open. For example, a heat battery on its own is not a Boiler Upgrade Scheme technology, so a “heat battery grant” deposit is a red flag.
- The certified firm isn’t the one fitting it. Subcontracting is allowed, but Ofgem says the MCS installer named on the application stays fully responsible, and any arrangement that breaks MCS rules won’t be accepted. Ask who will actually be on site, and make sure your contract is with the certified firm.
- “Free heat pump” cold calls. The grant takes money off the price; most homes still pay something. Never sign on the doorstep.
- Not on the MCS register, or certified for a different technology.
- Keeping your gas boiler as a backup. That’s a hybrid, and hybrids get no BUS grant.
What a good heat pump quote includes
- A heat loss survey and the heat pump size it leads to
- Radiator, pipework and hot water cylinder changes, itemised
- The Boiler Upgrade Scheme grant shown taken off the price
- The MCS certification number and consumer code membership
- Warranty terms, and what happens to your old boiler
Judge the price against the 2026 medians on our heat pump quotes page and the heat pump cost guide: the median air source heat pump under the scheme cost £12,826 installed in July to September 2026, before the grant.
Problem with an installer? Ofgem says both MCS and the relevant consumer code (RECC or HIES) can handle disputes. Keep your quote, invoice and MCS certificate. Great British Energy Guide is an independent guide, not MCS, Ofgem or the government.
MCS installers: common questions
What is an MCS certified installer?
An installer certified by the Microgeneration Certification Scheme (MCS), the UK standard for small-scale renewables such as heat pumps, solar panels and biomass boilers. Certification covers specific technologies, so check the installer is certified for the one you’re buying.
Do I need an MCS installer for the Boiler Upgrade Scheme?
Yes. Ofgem says “Installers must be MCS certified to install the heating system they are applying for under the Boiler Upgrade Scheme.” They must also belong to an approved consumer code. Without both, there’s no £7,500.
How do I check if an installer is MCS certified?
Use the Find an Installer search on mcscertified.com. Pick the technology, search near your address or by region, and filter for installers registered for the Boiler Upgrade Scheme. You can also search by the installer’s name or certification number.
Which consumer codes are approved for the Boiler Upgrade Scheme?
Ofgem lists three: the Renewable Energy Consumer Code (RECC), the Home Insulation and Energy Systems Contractors Scheme (HIES) and MCS itself. Installers on MCS’s redeveloped installer scheme don’t need a separate code; those still on the old MCS scheme must belong to RECC or HIES.
Do I apply for the grant myself?
No. Ofgem says the scheme is installer-led: your installer applies on your behalf, then Ofgem asks you to confirm your consent. The grant comes off your quote. Be wary of anyone who asks you to apply or pay a fee for the grant.
Do I need an MCS installer for the Smart Export Guarantee?
For solar panels, yes, or an equivalent. The SEG requires an MCS certificate or equivalent for solar, wind and micro-CHP up to 50kW. Your installer issues the certificate when the job is done.
Do I need an MCS installer to get 0% VAT on a heat pump?
HMRC’s VAT guidance on energy-saving materials doesn’t mention MCS. The zero rate applies to installing qualifying materials, including heat pumps, until 31 March 2027. For the grant, though, MCS is a must.
How many heat pump quotes should I get?
Get more than one if you can. Compare the system size, the heat loss calculation behind it, radiator and cylinder work, and the price with the grant already taken off. Our heat pump quotes page has 2026 median prices to judge against.